-Half Rack 1U, 9.5 inches special tiny design
-Two Channels Model – 120W RMS per channel
-Stereo into 4-8 Ohm loads
-Bridged mode 240W output for 70V or 100V (Direct Drive)
-Power down after ~15 minutes of no signal and comply with Energy Star Power consumption limits of < 0.5W in standby
-Red LED ( Front Panel) to indicated Standby mode is active
-Terminal Block analog audio inputs
-Selection for Power-Up mode
-Switch for High Pass Filter
-Natural cooling without Fan-
-TRIGGER could be external remoting ON/OFF
-Short circuit protection
-Overheating protection
Spec:
Stereo Mode (all channels driven)
120W x 2, 8Ω (31 V) RMS output (steady state), per channel @ < 1 % THD+N
120W x 2, 4Ω (22 V) RMS output (steady state), per channel @ < 1 % THD+N
Bridged Outputs (per bridged output pair)
240W, 70V @ < 1 % THD+N
240W, 100V @ < 1 % THD+N
(1/8 Rated Power Run Time: continuous operation)
Frequency Response 20 Hz - 20 kHz, +/- 2 dB @ 4Ω Load
Signal to Noise >90dB A WTD(20 Hz - 20 kHz)
Input Sensitivity 1.23 V (+4 dBu)
Gain Value W 25 dB @ 8Ω
Input Impedance >10k, balanced or unbalanced
Maximum Input Level 12.3 V (+24 dBu)
Trigger In/Out DC 12V
High Pass Filter 80 Hz
Input Connectors 5 pin Euro terminal
Trigger Connectors 3.5 mm Jacks
Output Connectors 4 pin Euro terminal (4Ω/8Ω)
2 pin Euro terminal (70V/100V)
Dimensions 214mm(W) x 249.8mm(D) x 44mm(H)
Net Weight XXX Kg
Shipping Weight XXX kg
Power Requirements 100 - 240 VAC, 50 - 60 Hz, 350W