The configured design rack is an elegant, all-in-one enclosed

rack made to fit the high-end decor of executive

boardrooms and home theatres. This ready-to-use rack

ships already assembled and includes casters for portability

plus leg levelers for stability, five shelves, five blank

panels, two fans, a rear access cover, lockable side panels,

and a tempered glass front door.

• Welded Frame: 16-gauge steel with 16-gauge top and

base, reinforced at loadbearing junctions

• Overall Height: 80.43" with casters (77.68" rack only)

• Top: Steel top features a center hole with grommet for

cable access and 2 vents.

• Fans: 2 whisper fans are installed in the top vents.

• Base: Features an open center, 2 holes with grommets

for rear cable access, grounding stud, 4 casters (2 locking),

and 4 leg levelers.

• Front Door: Real glass door (smoke color) with key lock

and inset handle can be adjusted to left or right hand

swing.

• Rear Access Cover: Opens from top, includes key lock.

• Side Panels: Lift off for easy access. Includes key lock.

• Mounting Rails: 2 pr. adjustable rails with mounting

holes tapped 10-32 and rack unit increments printed on

EIA spacing.

• Shelves: 9 (2U) steel shelves with bottom vents can be

repositioned as needed.

• Panels: 9 (2U) blank panels can be repositioned.

• Load Capacity: 1200 lbs.

• EIA/TIA/RoHS: Compliant

• Hardware: PilotPoint™ screws with captive washers

• Finish: Charcoal grey textured finish

• Origin: Made with 100% certified U.S. steel

The EIA/TIA compliant 19" equipment rack shall be Lowell

Model No. LCDR-4224 which shall measure 22.31"W x

24.00"D x 80.43"H (with casters). The rack shall have 42U

panel space and 1200 lbs. load capacity. Construction

shall be fully welded 16-gauge steel with 16.ga. top/base

reinforced at loadbearing junctions and finished with a

charcoal grey textured coating. It shall include a smoked

grey tempered glass front door with key lock, recessed

rear access cover with key lock, removable side panels

with locks, two pairs of 11-gauge steel rails with mounting

holes tapped 10-32 and rack unit increments printed on

EIA spacing, steel top with 2 vents and a hole with grommet

for cable access, nine (2U) shelves with vents, and

nine (2U) blank panels. The base shall feature a center

opening, 2 holes with grommets for rear cable access, a

grounding stud, 4 casters (2 locking) and 4 leg levelers.