HDMI 2.0b (18Gbps), HDCP 2.2 and DVI compliant
Video resolutions up to 4K2K@50/60Hz (YUV444)
HDR8/10/10+ (High Dynamic Range) pass through
Dolby Vision™ pass through
Supports ARC or S/PDIF return from display to TX/Rack via HDMI and/or optical S/PDIF
Supports HDMI High Bit Rate(HBR) audio pass through
Supports Dolby+, Atmos and DTS-X
Supports CEC
Two way POE, either the TX or the RX can be powered to power the other end device (only one supply is needed)
12V Bidirectional Infrared control signal together with the HDMI signal.
Transfers Bidirectional RS232 control signal together with the HDMI signal.
Transmission distance: Over CAT6 cable
70 meters/230ft.
1080P @60Hz36bit; 3D1080P@30Hz36bit;
40 meters/131ft.
4K2K@50/60Hz (YUV420), 4K2K@50/60Hz (YUV444)
Specifications |
---|
4K HDMI 40m/131 ft. on Cat6/Cat 5e 18Gbps extender
The EXARC 18Gbps HDMI Extender is a device which can extend your HDMI signal over 230t/70meters to a compatible 1080p display, 131ft/40meters to a HDMI 2.0b 18gbps compatible display. The EXARC supports HDR8/10/10+ and Dolby Vision as well as the entire HDMI 2.0b standard. The multifunction ARC/Audio feature makes the EXARC great when you need to bring audio back to the TX/Rack from the display. The ARC or S/PDIF [optical] can be output at the TX via the HDMI cable (ARC) or via the S/PDIF [optical] output. It also supports Bidirectional 12V Infrared control and RS232.
Primary Use: Extending HDMI AV signals along with control, ARC or S/PDIF return from display over a single Category cable.
Contact Details
customer service
my account