Video

The Vanco 280567 HDMI Extender transmits both HD audio and video over a single coax cable. Using RG-6 coaxial cable, the distance can be extended up to 328 feet (196 feet over RG-59 cable), which far exceeds the standard 50 foot limit imposed by HDMI. Achieve resolutions up to 1080p with no signal degradation. Pre-terminated BNC cables are a great option for quick installation.

Enjoy the convenience of wideband IR, which allows control of the source at the location of the display. The IR transmitter and IR receiver are included.

It works with HDMI and HDCP compatible devices. The compact design and durable metal enclosures make for easy installation and fit into any setup. It's wall or rack mountable and comes with a rack mounting ear set.

• 9 input frameless HDMI switch with scaling output (up to 4K @30Hz.)

• 2 - 2 picture modes (side by side & PIP), 4 -4 picture modes (Quad and Collaboration modes), & 9 View • Audio breakout that is adjustable

• Perfect for command/control rooms and/or oversight rooms

• Manual, IR Remote, IR commands, RS232, and IP control options • Suggested extenders are; EX1L or EXMICRO2

• Use to Extend the Length of (2) Category 5e Networking Cables
• Meets and Maintains EIA/TIA T568 A/B Standards
• 8-Position- 8-Conductor
• RJ45 Female Jacks on Each End
• White Color
• UL Listed

• Plug and Play operation

• Up to 3 RX devices can be used with TX

• HDMI 1.3 (6.75Gbps), HDCP 1.4 compliant

• Video resolutions up to 1080p 

• LPCM Stereo (32kHz., 44.1kHz., & 48kHz.

• HDMI "loop through" to extend existing HDMI circuit to another display

• Infrared control signal is transmitted together with the HDMI signal (from RX to TX)

• Supports 480i/480p/720p/1080i/1080p/1400x1050 resolutions

• Transmission distance:

  • 70m/ 232 ft.:

•       HDMI 2.0b (18Gbps) fully supported Including HDR/DolbyVision, WCG, HLG

•       eARC/ARC supported though HDMI connection

•       50m (164ft) at 4K @60Hz YUV4:4:4

•       70m (230ft) 1080p

•       2-Way 12V IR • RS232 pass through

•       Powers from single end (RX or TX)

• HDMI 2.0b (18Gbps), HDCP 2.2 and DVI compliant

• Video resolutions up to 4K2K@50/60Hz (YUV444)

• HDR8/10/10+ (High Dynamic Range) pass through

• Dolby Vision™ pass through

• Supports ARC or S/PDIF return from display to TX/Rack

• Supports HDMI High Bit Rate(HBR) audio pass through

• Supports CEC 

• Two way POE, either the TX or the RX can be powered to power the other end device (only one supply is needed)

• 100 BaseT Ethernet pass through

• 12V Bidirectional Infrared control signal together with the HDMI signal. 

• Transfer Bidirectional RS232 control signal together with the HDMI signal. 

• Transmission distance: Over CAT6 cable

  • 100 meters:

    • 1080P @60Hz36bit; 3D1080P@30Hz36bit;

  • 90 meters:

    • 4K2K@50/60Hz (YUV420), 4K2K@50/60Hz (YUV444)

 HDMI 2.0b (18Gbps) fully supported HDMI to HDMI (DolbyVision™ not supported on UTP output)

• Kit includes 4 RX devices that are powered via the matrix • Parallel HDMI/50m UTP output (at 4K)

• Compact sub 1RU design • Each output scales HDMI and UTP together

• IR is sent back from display to matrix

• Audio breakout can be accomplished with DAC1 or AUDEX1 devices (sold seperately)