Designed for superior off-axis performance and easy installation, the RS62-EZ offers attractive styling in an economical speaker for open-ceiling uses. The RS62-EZ uses one 6.5 inch (165 mm) coaxial driver with BroadBeam Ring™ technology for consistently smooth high frequency sound and 16 ohm impedance for easy daisy chaining in low voltage systems. The RS62-EZ includes galvenized steel hanging cables and a built in mounting plate for suspending the speaker as well as a threaded opening on top of it®'s cover plate for direct-to-conduit mounting. The enclosure is constructed of injection molded ABS with glasber reinforcement for lasting durability in indoor or outdoor applications and includes an aluminum grille with protective powder coated finish. Cost effective engineering with high-performance sound makes the RS62-EZ speaker ideal for music and paging applications in retail, grocery stores, restaurants, hotels, casinos, museums, trade shows and conference rooms and is suitable for use in voice alarm applications subject to EU regulations EN60849 and BS5839-8. For applications where additional bass is required, SoundTube®'s RS1001i-II-T 10-inch subwoofer may be used. Hanging hardware, weather plug, cover plate, and AC-RSEZ-HH-10 are included.
| Manufacturer's Category | RS-EZ Economical Pendant |
|---|---|
| Height | 10.4 in / 264.2 mm |
| Width/Diameter | 10.08 in / 256 mm |
| Shipping Weight | 9.5 lbs / 4.31 kg |
| Carton Height | 13.25 in / 336.55 mm |
| Carton Length | 12 in / 304.8 mm |
| Carton Width | 12 in / 304.8 mm |
| Certifications | CE, EN54, RoHS, UL1480A |
| Enclosure Properties | Ported, Reinforced ABS |
| Included Accessories | Adapter, Cover Plate, Hanging Hardware, Weather Plug, Wire Gland |
| Optional Accessories | Black Grille (GRL-RS62-EZ-BK)|10' Hanging Cable (AC-RS-HH-10)|20' Hanging Cable (AC-RS-HH-20)|50' Hanging Cable (AC-RS-HH-50)|Black Mounting Bracket (AC-RS-SM5-BK)|Beam Clamp (AC-BC1)|Forged Eye Bolt (AC-FE1)|Black Split Loom Tubing (AC-SLT-10-BK)|Snap Link (AC-SL1) |
| Source Inputs | 4 Pin Ceramic Terminal |
| Crossover Frequency | 3.0 kHz |
| Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz) | 3.6 and 7.1 |
| Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz) | 5.5dB and 8.5dB |
| Frequency Response (± 10 dB) | 80 Hz - 22 kHz |
| Frequency Response (± 3 dB) | 100 Hz - 22 kHz |
| Grille Properties | Aluminum, Powder-Coated |
| Low Frequency Voice Coil | 1 in / 25.4 mm |
| Low Pass Crossover | 6 dB per octave 1st order |
| Magnetically Boosted | No |
| Max. Continuous Power RMS | 32W |
| Max. Program Power | 64 W |
| Minimum Impedance (Ω Ohms) | 16 Ω |
| Network Type: High Pass | 6 dB per octave 1st order |
| Nominal Impedance (Ω Ohms) | 16 Ω |
| Tweeter Driver | 1" Silk Dome w/ BroadBeam Ring® |
| Woofer Driver | 6.5" Polypropylene Cone w/ Butyl Rubber Surround |
| Sensitivity dB @ 1W/1M | 91.2 dB |
| Sensitivity dB @ 2.83V/1M | 88.2 dB |
| Tap Selector | Rotary Switch |
| Transformer Options | 25 / 70.7 / 100 V, 16 Ohm direct |
| Transformer Taps (25V/70.0V/100V) | 4W/32W/32W |
Designed for superior off-axis performance and easy installation, the RS62-EZ offers attractive styling in an economical speaker for open-ceiling uses. The RS62-EZ uses one 6.5 inch (165 mm) coaxial driver with BroadBeam Ring™ technology for consistently smooth high frequency sound and 16 ohm impedance for easy daisy chaining in low voltage systems. The RS62-EZ includes galvenized steel hanging cables and a built in mounting plate for suspending the speaker as well as a threaded opening on top of it®'s cover plate for direct-to-conduit mounting. The enclosure is constructed of injection molded ABS with glasber reinforcement for lasting durability in indoor or outdoor applications and includes an aluminum grille with protective powder coated finish. Cost effective engineering with high-performance sound makes the RS62-EZ speaker ideal for music and paging applications in retail, grocery stores, restaurants, hotels, casinos, museums, trade shows and conference rooms and is suitable for use in voice alarm applications subject to EU regulations EN60849 and BS5839-8. For applications where additional bass is required, SoundTube®'s RS1001i-II-T 10-inch subwoofer may be used. Hanging hardware, weather plug, cover plate, and AC-RSEZ-HH-10 are included.
Manufacturer's Category
RS-EZ Economical Pendant
Height
10.4 in / 264.2 mm
Width/Diameter
10.08 in / 256 mm
Shipping Weight
9.5 lbs / 4.31 kg
Carton Height
13.25 in / 336.55 mm
Carton Length
12 in / 304.8 mm
Carton Width
12 in / 304.8 mm
Certifications
CE, EN54, RoHS, UL1480A
Enclosure Properties
Ported, Reinforced ABS
Included Accessories
Adapter, Cover Plate, Hanging Hardware, Weather Plug, Wire Gland
Optional Accessories
Black Grille (GRL-RS62-EZ-BK)|10' Hanging Cable (AC-RS-HH-10)|20' Hanging Cable (AC-RS-HH-20)|50' Hanging Cable (AC-RS-HH-50)|Black Mounting Bracket (AC-RS-SM5-BK)|Beam Clamp (AC-BC1)|Forged Eye Bolt (AC-FE1)|Black Split Loom Tubing (AC-SLT-10-BK)|Snap Link (AC-SL1)
Source Inputs
4 Pin Ceramic Terminal
Crossover Frequency
3.0 kHz
Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz)
3.6 and 7.1
Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz)
5.5dB and 8.5dB
Frequency Response (± 10 dB)
80 Hz - 22 kHz
Frequency Response (± 3 dB)
100 Hz - 22 kHz
Grille Properties
Aluminum, Powder-Coated
Low Frequency Voice Coil
1 in / 25.4 mm
Low Pass Crossover
6 dB per octave 1st order
Magnetically Boosted
No
Max. Continuous Power RMS
32W
Max. Program Power
64 W
Minimum Impedance (Ω Ohms)
16 Ω
Network Type: High Pass
6 dB per octave 1st order
Nominal Impedance (Ω Ohms)
16 Ω
Tweeter Driver
1" Silk Dome w/ BroadBeam Ring®
Woofer Driver
6.5" Polypropylene Cone w/ Butyl Rubber Surround
Sensitivity dB @ 1W/1M
91.2 dB
Sensitivity dB @ 2.83V/1M
88.2 dB
Tap Selector
Rotary Switch
Transformer Options
25 / 70.7 / 100 V, 16 Ohm direct
Transformer Taps (25V/70.0V/100V)
4W/32W/32W
The Soundsphere HK 3-Way Cable Hanging Kit is designed for the Soundsphere Q-6, Q-8 and 110B loudspeakers. Its single point cable design mounts directly onto an exposed eye bolt while suspending the loudspeaker in a ceiling configuration.
SKU: 209-2326
14AWG, 4 Conductor, Stranded (105 Strand),
PVC Jacket, Pull Box, 500ft.
•
Intercom Systems•
Sound / Audio•
Indoor ApplicationsConductor
4 Core (Stranded)Material Oxygen Free Copper Wire Strands
Size 14 AWG
Stranding 105 Strand
Strand Diameter 0.16 mm
Insulation
Material PVC
Average Thickness 0.355 mm
Min. Point Thickness 0.330 mm
Insulation Diameter (±0.05mm) 2.60 mm
Assembly Diameter
(±0.1mm) 6.20 mmJacket
Material PVC
Color White
Average Thickness 0.80 mm
Min. Point Thickness 0.72 mm
Outer Diameter (±0.1mm) 8.00 mm
Insulation Color
Black, Red, Green, White
Ripcord
Material Nylon (150D)
Electrical Performance
Rated Temperature (ºC) 75
Voltage Rating 30V
Reference Standard ETL, CMR, CL3
Mechanical Characteristics
Test Object Jacket
Test Material PVC
Before Tensile Strength (Mpa) >=13.8
Aging Elongation (%) >=100
Aging Condition (ºCxhrs) 100x168
After Tensile Strength (Mpa) >=85% of unaged
Aging Elongation (%) >=50% of unaged
Cold Bend (-20±2º Cx4hrs) No Crack
Marking on Jacket
VERTICAL 4001453 cETLus AUDIO CABLE 14 AWG 4 COND 105
STRANDED OXYGEN FREE SUN RES CMR FT4 CL3 RoHS XXXFT
Jacket
Conductor
Rip Cord
SKU: 209-2326
14AWG, 4 Conductor, Stranded (105 Strand),
PVC Jacket, Pull Box, 500ft.
•
Intercom Systems•
Sound / Audio•
Indoor ApplicationsConductor
4 Core (Stranded)Material Oxygen Free Copper Wire Strands
Size 14 AWG
Stranding 105 Strand
Strand Diameter 0.16 mm
Insulation
Material PVC
Average Thickness 0.355 mm
Min. Point Thickness 0.330 mm
Insulation Diameter (±0.05mm) 2.60 mm
Assembly Diameter
(±0.1mm) 6.20 mmJacket
Material PVC
Color White
Average Thickness 0.80 mm
Min. Point Thickness 0.72 mm
Outer Diameter (±0.1mm) 8.00 mm
Insulation Color
Black, Red, Green, White
Ripcord
Material Nylon (150D)
Electrical Performance
Rated Temperature (ºC) 75
Voltage Rating 30V
Reference Standard ETL, CMR, CL3
Mechanical Characteristics
Test Object Jacket
Test Material PVC
Before Tensile Strength (Mpa) >=13.8
Aging Elongation (%) >=100
Aging Condition (ºCxhrs) 100x168
After Tensile Strength (Mpa) >=85% of unaged
Aging Elongation (%) >=50% of unaged
Cold Bend (-20±2º Cx4hrs) No Crack
Marking on Jacket
VERTICAL 4001453 cETLus AUDIO CABLE 14 AWG 4 COND 105
STRANDED OXYGEN FREE SUN RES CMR FT4 CL3 RoHS XXXFT
Jacket
Conductor
Rip Cord
The RS800i includes an 8-inch polypropylene woofer and one 1.0 inch convex titanium tweeter with FerroFluid cooling mounted to a proprietary cast-aluminum baffle and heat sink. The two-way, ported speaker with an open-ceiling enclosure design delivers extended low-end response (58 Hz) and 105° off-axis performance (2 to 10 kHz, indepen-dently verified). SoundTube®'s proprietary BroadBeam® waveguide tweeter system delivers consistent high-performance audio across the operating bandwidth. The patented ZeroReflection™ enclosure technology provides optimal sound reproduction and cabinet rigidity. The easy access six-position selectable tap switch for 25-, 70.7- and 100-volt applications with transformer bypass position simplifies ordering and inventory tracking. The RS800i speaker design incorporates a low-profile grille, a proprietary motor-board, driver protection circuitry and a six-position tap switch with a transformer bypass position. Hanging hardware with galvanized steel cables are included and features a SpeedClamp™ self-locking cable grip for fast, easy and secure installation. Euroblock connector and terminal weather boot are included.
70V taps 5-10-19-35-66W
The elegant “LCDR” with smoked grey tempered glass front door is made to fit the high-end decor of executive boardrooms and home theatres. The welded 16-gauge steel frame with charcoal grey textured finish has a solid top with vents and factory-mounted whisper fans already in place. Several 19" panels and vented shelves are installed leaving plenty of room for rackmount equipment. Side panels and a rear access cover can be locked for security or removed for access. Cables can be easily routed through top/bottom holes with inset grommets. The LCDR includes casters for portability plus leg levelers to provide a secure footprint. This ready-to-use, pre-configured EIA/TIA/RoHS compliant rack is available in 18-24 rack units (24 in. depth x 22.3 in. width).
42U x 24"D x 22.31"W
The configured design rack is an elegant, all-in-one enclosed
rack made to fit the high-end decor of executive
boardrooms and home theatres. This ready-to-use rack
ships already assembled and includes casters for portability
plus leg levelers for stability, five shelves, five blank
panels, two fans, a rear access cover, lockable side panels,
and a tempered glass front door.
Construction & Features
• Welded Frame: 16-gauge steel with 16-gauge top and
base, reinforced at loadbearing junctions
• Overall Height: 80.43" with casters (77.68" rack only)
• Top: Steel top features a center hole with grommet for
cable access and 2 vents.
• Fans: 2 whisper fans are installed in the top vents.
• Base: Features an open center, 2 holes with grommets
for rear cable access, grounding stud, 4 casters (2 locking),
and 4 leg levelers.
• Front Door: Real glass door (smoke color) with key lock
and inset handle can be adjusted to left or right hand
swing.
• Rear Access Cover: Opens from top, includes key lock.
• Side Panels: Lift off for easy access. Includes key lock.
• Mounting Rails: 2 pr. adjustable rails with mounting
holes tapped 10-32 and rack unit increments printed on
EIA spacing.
• Shelves: 9 (2U) steel shelves with bottom vents can be
repositioned as needed.
• Panels: 9 (2U) blank panels can be repositioned.
• Load Capacity: 1200 lbs.
• EIA/TIA/RoHS: Compliant
• Hardware: PilotPoint™ screws with captive washers
• Finish: Charcoal grey textured finish
• Origin: Made with 100% certified U.S. steel
A&E Specifications
The EIA/TIA compliant 19" equipment rack shall be Lowell
Model No. LCDR-4224 which shall measure 22.31"W x
24.00"D x 80.43"H (with casters). The rack shall have 42U
panel space and 1200 lbs. load capacity. Construction
shall be fully welded 16-gauge steel with 16.ga. top/base
reinforced at loadbearing junctions and finished with a
charcoal grey textured coating. It shall include a smoked
grey tempered glass front door with key lock, recessed
rear access cover with key lock, removable side panels
with locks, two pairs of 11-gauge steel rails with mounting
holes tapped 10-32 and rack unit increments printed on
EIA spacing, steel top with 2 vents and a hole with grommet
for cable access, nine (2U) shelves with vents, and
nine (2U) blank panels. The base shall feature a center
opening, 2 holes with grommets for rear cable access, a
grounding stud, 4 casters (2 locking) and 4 leg levelers.
6.5” 2-Way In-Ceiling w/ Micro-flange Grille
Tweeter: .75” Variable Axis Soft Dome
Woofer: 6.5” Coaxial Polypropylene with NBR Surround
Frequency Response: 55 Hz - 20 kHz
Sensitivity: 87 dB
Impedance: 8Ω
Recommended Power: 5 - 100 Watts
OA Diameter: 9.1”
Mounting Depth: 3.75”
Cutout Diameter: 8.062”
Weight: 2 lbs.
Grille: White Powder-Coated Galvanized Steel (paintable)
8” 2-Way In-Ceiling Speaker w/ Micro-Flange Grille
Tweeter:
.75” Variable Axis Soft DomeWoofer:
8” Coaxial Polypropylene with NBR SurroundFrequency Response:
48 Hz - 20 kHzSensitivity:
87 dBImpedance:
8ΩRecommended Power:
5 - 120 WattsOA Diameter:
10.625”Mounting Depth:
3.75”Cutout Diameter:
9.625”Weight:
4.75 lbs.Grille:
White Powder-Coated Galvanized Steel (paintable)
Contains: (9 pieces) 18" x 32" Dynamat Xtreme
(36 square feet total) Self-adhesive.
.jpg "SND-SM500i-II-WX-BK")
The white SM500i-II 5.25" Surface Mount Speaker from SoundTube Entertainment is a 5.25", two-way speaker with a midsize enclosure design that delivers low-end response (60 Hz) and optimal off-axis performance (2 to 10 kHz). The proprietary BroadBeam technology incorporates a high-frequency waveguide mated to a 1" convex aluminum tweeter with FerroFluid cooling. This helps deliver consistent high-performance audio across the operating bandwidth. The result is an audio system requiring fewer speakers with high intelligibility, offering reduced power needs, shorter installation time, and cost-effectiveness.
The SM500i-II Speaker features a low-profile grille and 6-position tap switch with transformer bypass. In addition the security knob reduces the chances of tampering after installation. Designed for indoor and damp outdoor locations to mid-level SPL surface-mount applications, the SM500i-II speaker comes with the Stealth bracket mounting system, allowing for an increased aiming angle. It also includes a detachable mounting plate designed for pre-mounting in either wall or pole applications. The speaker is suitable for music and paging in retail, amusement, restaurant, airports, hotels, schools and casinos.
The 8” LF driver and the 8” MF/LF cone with its coaxially horn-mounted HF compression driver provide a controlled conical 85 degree dispersion pattern. The W2-228 is ideal for short throw applications where both full-range reproduction and high weather-resistance are needed, providing an uncompromised musical system in a compact package. It can be mounted in either horizontal or vertical orientations without affecting the coverage pattern.
The structurally strong loudspeaker enclosure and faceplate and three-layer Weather-Stop™ grille provide weather-resistance and durability. All exposed hardware is stainless steel or powder-coated aluminum extrusion. A stainless steel powder-coated mounting yoke is included.
516-249-8800
About Us
Events
Locations
Line Card
Solutions
.jpg "SND-SM500i-II-WX-BK")
45 Cain Drive, Plainvew, Ny 11803 
516-249-8800
sales@dsgdist.com